Sign In | Join Free | My qualitytoyschina.com
China LonRise Equipment Co. Ltd. logo
LonRise Equipment Co. Ltd.
LonRise Equipment Co. Ltd. Better Service Better Business
Verified Supplier

10 Years

Home > Huawei Network Switches >

Huawei S5735-S48S4X Gigabit Access Switches Provide GE Electrical Downlink Ports And 10GE Uplink Ports

LonRise Equipment Co. Ltd.
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now

Huawei S5735-S48S4X Gigabit Access Switches Provide GE Electrical Downlink Ports And 10GE Uplink Ports

Brand Name : Huawei

Model Number : S5735-S48S4X

Certification : CE FCC

Place of Origin : China

Function : LACP, QoS, SNMP, Stackable, VLAN Support

Product Part Number : 02350EXQ

Device Type : Switch - 48 Ports - Managed

Communication Mode : Full-Duplex & Half-Duplex

Transmission Rate : 10/100/1000Mbps

Products Status : Stock

Subtype : 100 Gigabit Ethernet

Contact Now

Huawei S5735-S48S4X gigabit access switches provide

GE electrical downlink ports and 10GE uplink ports

Technical specifications

Item

Description

Memory (RAM) 1 GB
Flash 512 MB in total. To view the available flash memory size, run the display version command.
Mean time between failures (MTBF) 66.33 years
Mean time to repair (MTTR) 2 hours
Availability > 0.99999
Service port surge protection NA
Power supply surge protection
  • Using AC power modules: ±6 kV in differential mode, ±6 kV in common mode
  • Using DC power modules: ±2 kV in differential mode, ±4 kV in common mode
Dimensions (H x W x D)
  • Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 420.0 mm (1.72 in. x 17.4 in. x 16.5 in.)
  • Maximum dimensions (the depth is the distance from ports on the front panel to the handle on the rear panel): 43.6 mm x 442.0 mm x 444.2 mm (1.72 in. x 17.4 in. x 17.49 in.)
Weight (with packaging) 8.27 kg (18.23 lb)
Stack ports Any 100/1000BASE-X ports or 10GE SFP+ ports (applicable in V200R019C10 and later versions)
RTC Supported
RPS Not supported
PoE Not supported
Rated voltage range
  • AC input: 100 V AC to 240 V AC, 50/60 Hz
  • DC input: -48 V DC to -60 V DC
Maximum voltage range
  • AC input: 90 V AC to 264 V AC, 47 Hz to 63 Hz
  • DC input: -38.4 V DC to -72 V DC
Maximum power consumption (100% throughput, full speed of fans) 89 W
Typical power consumption (30% of traffic load, tested according to ATIS standard) 67 W
Operating temperature
-5°C to +50°C (23°F to 122°F) at an altitude of 0-1800 m (0-5906 ft.)
NOTE:

When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).

The switch cannot be started when the ambient temperature is lower than 0°C (32°F).

Short-term operating temperature

-5°C to +55°C (23°F to 131°F) at an altitude of 0-1800 m (0-5906 ft.)

NOTE:

When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).

The equipment can operate beyond the normal operating temperature range for a short-term period, but the following conditions must be met:
  • The equipment operates at a temperature of over 45°C (113°F) consecutively for at most 96 hours in one year.
  • The equipment operates at a temperature of over 45°C (113°F) for a total of no more than 360 hours in one year.
  • The equipment operates at a temperature of over 45°C (113°F) for no more in 15 times in one year.
The equipment may be damaged or experience unexpected exceptions if any of the preceding limits is exceeded.

The equipment cannot start when the temperature is lower than 0°C (32°F). The maximum distance of optical modules used in these conditions cannot exceed 10 km.

Storage temperature -40°C to +70°C (-40°F to +158°F)
Noise under normal temperature (27°C, sound power) < 61 dB(A)
Relative humidity 5% to 95%, noncondensing
Operating altitude 0-5000 m (0-16404 ft.)
Certification
  • EMC certification
  • Safety certification
  • Manufacturing certification
Part number 98010947

S5735-S48S4X appearance

1

Forty-eight 100/1000BASE-X ports

2

Four 10GE SFP+ ports

3 One console port 4 One ETH management port
5 One USB port 6

One PNP button

NOTICE:

To restore the factory settings and reset the switch, hold down the button for at least 6 seconds.

To reset the switch, press the button.

Resetting the switch will cause service interruption. Exercise caution when you press the PNP button.

7

Ground screw

NOTE:
It is used with a ground cable.
8

Power module slot 1

NOTE:

Applicable power module:

9

Power module slot 2

NOTE:

Applicable power module:

- -

Huawei S5735-S48S4X Gigabit Access Switches Provide GE Electrical Downlink Ports And 10GE Uplink PortsHuawei S5735-S48S4X Gigabit Access Switches Provide GE Electrical Downlink Ports And 10GE Uplink Ports


Product Tags:

S5735-S48S4X Gigabit Access Switches

      

GE Electrical Downlink Network Switches

      

10GE Uplink Ports Huawei Network Switches

      
Quality Huawei S5735-S48S4X Gigabit Access Switches Provide GE Electrical Downlink Ports And 10GE Uplink Ports wholesale

Huawei S5735-S48S4X Gigabit Access Switches Provide GE Electrical Downlink Ports And 10GE Uplink Ports Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: LonRise Equipment Co. Ltd.
*Subject:
*Message:
Characters Remaining: (0/3000)